New items now on sale at www.hobbycomponents.com
HOBBY COMPONENTS TARGET / PROTOTYPING / ZIF BUNDLES
This prototyping/programming board is designed for use with the Atmel ATMega48P, ATMega168P, & ATmega328P microcontrollers. The board has a number of features including a 24×12 0.1″ grid prototyping area specifically laid out to match the pin-out of these devices. Additional pads are also provided for…
STM8S105K4 DEVELOPMENT BOARD
This development/breakout board (HCDVBD0032) is based around the ST Microelectronics STM8S105K4 microcontroller. STM8 microcontrollers are an ultra low cost solution to embedded control. This development board provides convenient access to the devices I/O pins via standard 2.54mm pitch headers. Besides providing access to most of the microcontrollers I/O, there is additionally a…
NE555 FREQUENCY ADJUSTABLE PULSE GENERATOR
This is a square wave pulse generator module based on the ubiquitous NE555 timer IC. The module can be powered from a wide power supply range (4.5 to 12V) and will produce a continuous square wave output between 15Hz to 24KHz which can be set by on on-board multi-turn potentiometer. Useful for applications where an approximate…
TTP223 CAPACITIVE TOUCH SENSOR
A capacitive touch sensor module based on the dedicated TTP223 touch sensor IC. The module provides a single integrated touch sensing area of 11 x 10.5mm with a sensor range of ~5mm. An on-board LED will give a visual indication of when the sensor is triggered. When triggered the modules output will switch from its…
MAX471 GY-471 3A CURRENT SENSOR MODULE
The MAX471 module (HCSENS0041) is a complete, bidirectional, highside current-sense amplifier for portable PCs, telephones, and other systems where battery/DC power-line monitoring is critical. High-side power-line monitoring is especially useful in battery-powered systems, since…
RCWL-0516 MICROWAVE RADAR MOTION DETECTOR
This module has been designed as an alternative to the PIR motion detectors commonly used in burglar alarms. Instead of sensing changes in infrared radio emitted by a moving person this sensor uses a microwave Doppler radar to detect moving objects. It has a sensitivity range of ~7 meters. When triggered its trigger output pin will switch from…
STM8103F3 DEVELOPMENT BOARD
This development/breakout board (HCDVBD0034) is based around the ST Microelectronics S103F3P6 microcontroller. STM8 microcontrollers are an ultra low cost solution to embedded control. This development board provides convenient access to the devices I/O pins via standard 2.54mm pitch headers (require soldering). Besides providing access to most of the microcontrollers I/O, there is additionally…
AMS1117 3.3V POWER SUPPLY MODULE
This power supply module is based on the AMS1117 3.3V regulator. It is capable of regulating a wide range of input voltage (4.0 to 12V) down to a fixed 3.3V output at up to 1A (Vin = 4.5V). Standard 0.1″ header pins provide a means of connecting to its input and output terminals. These header pins have also been conveniently placed so that the module can be inserted face down into standard…
